Brands

Specifications

• 3-stage temperature selection: 60°C / 350°C / 550°C
• Working temperature range: 60-550°C
• Heat-up time: 1 second

Features

• 1800W rated input power
• Overheat protection guards against airflow blockages

Specifications

• No-load speed: 12,000rpm
• Weight: 1.7kg

Features

• 700W rated input power for reliable, everyday cutting and grinding
• Outstanding overload capacity for tough jobs

Features

• Articulating drill press drills perpendicular or angled holes in 15° increments, up to 90° horizontal
• Tool holder locks the rotary tool at 90° for polishing, sanding and grinding

Specifications

• Variable speed dial: 10,000-33,000rpm for precise control

Features

• 130W motor suited to both fine detail work and tougher DIY tasks
• EZ Twist nose cap -- no separate wrench needed for accessory changes

Specifications

• Variable speed: 5,000-35,000rpm

Features

• 175W motor, the most powerful in the Dremel corded range
• Electronic feedback maintains consistent power under load

Specifications

• Power supply: 220-240V, 50-60Hz

Features

• Robust 1000W single-speed motor
• Core drilling up to Ø32mm, Weldon twist drills up to Ø13mm, countersinking up to Ø40mm

Specifications

• Hybrid power: runs on an 18V battery or plugged into mains for unlimited runtime

Features

• Up to 4,000 lumens of brightness
• Mounted on a tripod adjustable up to 215cm in height

Specifications

• Rapid Refill Technology: refills to max 9.3 bar in approx. 17 seconds
• Weight: 13.4kg

Features

• Brushless motor with oil-free technology and a removable air filter for low maintenance
• 7.3-litre tank -- delivers 1,000+ brad nails per battery charge

Specifications

• Two vibration modes: normal (12,000/min) and power (15,200/min)
• Weight with battery: approx. 4.2kg

Features

• Brushless motor for consistent output under load
• 28mm diameter, 824mm flexible vibrating shaft

Specifications

• Two-speed gearbox: 0-500rpm low, 0-1,200rpm high
• Weight: approx. 4.7-5.2kg without battery

Features

• Brushless motor with constant speed control under load
• Low speed suited to paints and coatings, high speed suited to mortar and thicker mixes

Specifications

• Impact energy: 23.1J (current manufacturer specification)
• Power input: 1240W
• Full-load impact rate: 1,400 blows/min

Features

• 30mm hex tool holder
• Shock-absorbing T-handles reduce transmitted vibration

Specifications

• Power input: 2,000W
• 2 heat settings: 450°C / 600°C, plus a 50°C cool-air shot
• 2-stage air volume switch: 250 / 500 l/min

Features

• Overheat protection
• Hanging hook for storage and stationary use

Specifications

• Power input: 2,000W
• Continuously variable temperature: 50-650°C in 10°C increments
• Variable airflow: 0.25-0.5m³/min

Features

• LCD display with temperature and airflow readout and adjustment buttons
• Constant Heat Control for continuous work without overheating

Specifications

• Voltage: 220 - 240V ~ 50/60Hz
• Input power: 2400W
• No-load speed: 6400 rpm

Features

• 1 piece auxiliary handle
• 1 set carbon brushes

Specifications

• Voltage: 220 - 240V ~ 50/60Hz
• Input power: 750W
• No-load speed: 12000 rpm

Features

• 1 piece auxiliary handle

Specifications

• Voltage: 20V
• No-load speed: 18000 rpm
• Max air volume: 2.7m³/min

Specifications

• Voltage: 20V
• Max input power: 900W
• No-load speed: 3000/6000/9000 rpm

Features

• Brushless motor
• 1 set abrasive metal cutting disc (5 piece)

Specifications

• Voltage: 20V
• No-load speed: 0-550/0-2100 rpm
• Max impact rate: 31500 bpm

Features

• Brushless motor
• Jacobs metal chuck

Specifications

• Voltage: 20V
• No-load speed: 0-500/0-2000 rpm
• Max impact rate: 30000 bpm

Features

• Brushless motor
• Metal chuck

Specifications

• Voltage: 20V
• Square drive: 1/2"
• No-load speed: 0-1800/0-2000/0-2400 rpm

Features

• Brushless motor
• Integrated LED work light

Specifications

• Voltage: 20V
• Angle grinder (CAGLI212025): brushless motor, max input power 1200W, no-load speed 3000/6000/9000 rpm, disc diameter 115 mm, spindle thread M14, anti-vibration handle
• Impact drill (CIDLI206681): brushless motor, no-load speed 0-500/0-2000 rpm, max impact rate 30000 bpm, max torque 66Nm, metal chuck, chuck capacity 13 mm, torque settings 22+1+1, mechanical 2-speed gear, spindle lock function, integrated LED work light

Features

• With 1 piece cordless angle grinder (CAGLI212025)
• With 1 piece compact brushless cordless impact drill (CIDLI206681)

Specifications

• System: 18V LXT
• Voltage: 18V
• Capacity: 3.0Ah

Features

• Fast charging - reaches full charge in around 30 minutes with a compatible rapid charger
• Integrated LED charge-level indicator lets you monitor remaining charge

Specifications

• System: 18V LXT
• Voltage: 18 V
• Capacity: 5.0 Ah

Features

• Integrated LED battery charge-level indicator lets the user monitor remaining charge
• Fast charging - reaches full charge in around 45 minutes with a compatible rapid charger

Specifications

• Power input: 1,100W
• Blade diameter: 185mm
• Bore diameter: 30mm

Features

• Spark-free metal cutting for clean cuts without burrs or burns
• Externally accessible carbon brushes for easy maintenance

Specifications

• Power input: 450W
• Rated voltage: 230V
• Strokes per minute: 500–3,100 spm (variable)

Features

• 3 orbital settings plus straight cutting for different materials
• Variable speed dial

Specifications

• Power input: 720W
• Rated voltage: 230V
• Strokes per minute: 800–2,800 spm (variable)

Features

• Tool-less blade change system
• Variable electronic speed control

Specifications

• Power input: 500W
• No-load speed (high): 0–2,200 rpm
• Drywall screw capacity: up to 5mm

Features

• 2-speed high-torque gearbox
• Drives cyclone-coded (self-drilling) screws

Specifications

• Dual-purpose: hammer drilling and rotary-only dry diamond core drilling
• Power input: 850W
• No-load speed: 0–1,500 rpm

Features

• Torque limiter/safety clutch disengages the drive at a preset torque to protect the operator
• Large vibration-free rubber side grip

Specifications

• Power input: 550W
• Belt size: 30 x 533mm
• Belt speed: 200–1,000 m/min (variable)

Features

• Compact, lightweight design for detail work in confined spaces
• Variable speed control matched to the application

Specifications

• Motor power: 1.5 kW / 2 HP
• Voltage: 220V single phase
• Tank capacity: 24 L

Features

• Direct-drive single cylinder, single-stage compressor (no belt)
• Cast iron cylinder with piston compression rings for quick setting

Specifications

• Motor power: 1.5 kW / 2 HP
• Voltage: 220V single phase
• Tank capacity: 50 L

Features

• Direct-drive single cylinder, single-stage compressor (no belt)
• Cast iron cylinder with piston compression rings

Specifications

• Motor power: 2.2 kW / 3 HP
• Voltage: 220V single phase
• Tank capacity: 100 L

Features

• 100 litre air compressor
• Splash lubrication with forced ventilation for sustained duty cycles

Specifications

• Motor power: 0.75 kW / 1 HP
• Voltage: 220V single phase
• Tank capacity: 24 L

Features

• Silent, oil-free operation suited to indoor/workshop use
• Air filter fitted to compressor head

Specifications

• Motor power: 1.5 kW / 2 HP
• Voltage: 220V single phase
• Tank capacity: 50 L

Features

• Silent, oil-free operation suited to indoor/workshop use
• Air filter fitted to compressor head

Specifications

• Motor power: 1.1 kW / 1.5 HP
• Voltage: 220V single phase
• Tank capacity: 6 L

Features

• Compact 6L mini compressor, oil-free and low maintenance
• Air filter fitted to compressor head

Specifications

• Motor power: 1.5 kW / 2 HP
• Voltage: 220V single phase
• Tank capacity: 30 L (vertical)

Features

• Oil-free, low-maintenance single cylinder single-stage pump
• Vertical tank design for a smaller floor footprint

Specifications

• Pad size: 150mm

Features

• Orbital sanding action for a smooth, swirl-free finish
• Compact palm-style body for one-handed control

Specifications

• Input voltage: 220V
• Welding current range: 20-120A
• Duty cycle: 60%

Features

• Portable inverter design suited to both entry-level and professional welders
• Versatile across a range of general welding tasks

Specifications

• Input voltage: 380V, 3-phase, 50/60Hz
• Max input current: 25.3A
• Power factor: 0.75

Features

• 2T/4T torch trigger modes
• Gas check function for pre-flow torch testing

Specifications

• Input voltage: 220V
• Max input current: 30A
• Power factor: 0.75

Features

• 2T/4T torch trigger modes
• Gas check function

Specifications

• Input voltage: 220V single-phase, 50/60Hz
• Rated input power: 5kW
• Rated input current: 31A

Features

• 2T/4T torch trigger modes
• Gas check function

Specifications

• Input voltage: 220V
• Duty cycle: 60%
• Welding current range: 20 - 120A

Features

• MMA (stick) welding with Lift-TIG capability
• Anti-Stick prevents electrode sticking

Specifications

• Welding current range: 20–160A
• Input voltage: 220V
• Duty cycle: 60%

Features

• IGBT inverter technology for a compact, portable welder
• Anti-Stick function prevents electrode sticking to the workpiece

Specifications

• Input voltage: 220V
• Input current: 31A
• Output current range: 30 - 160A

Features

• Dual-purpose MIG and MMA (stick) inverter welder
• Compact, portable 'mini' design

Specifications

• Model: MAT9005
• Input voltage: 220 V
• Welding current range: 20-200 A

Features

• Portable IGBT inverter DC arc welder, versatile for multiple applications
• Anti-Stick technology prevents electrode sticking

Specifications

• Rated input power: 950 W
• Output power: 510 W
• No-load speed: 2,500-8,700 rpm

Features

• High-torque die grinder for demanding grinding applications with a long grinding spindle
• Robust planetary gear delivers high torque in a compact design

Specifications

• Battery voltage: 18V
• Air temperature: 300 / 500°C
• Air volume: 200 / 160 L/min

Features

• Cordless 18V heat gun compatible with Metabo CAS batteries
• Two temperature levels

Specifications

• Power input: 750W
• No-load stroke rate: 1,000–3,100/min
• Stroke length: 26mm

Features

• VTC electronics maintains constant stroke rate under load
• Pendulum stroke with 3 selectable settings for material-matched cutting

Specifications

• Voltage: 18 V
• Capacity: 4.0 Ah
• Energy: 72 Wh

Features

• LiHD (Lithium-ion High Density) cell technology for high power and long runtime
• Patented AIR COOLED charging technology for faster, cooler charging

Specifications

• Output: 12V / 15A, with DC connector

Features

• Built-in Bluetooth -- monitor and configure via the VictronConnect app
• Up to 94% charging efficiency

Specifications

• Output: 12V / 25A (Amp-1 rating)

Features

• Built-in Bluetooth -- monitor and configure via the VictronConnect app
• Up to 94% charging efficiency, generating far less heat than standard chargers

Specifications

• Output: 12V / 25A (Amp-1 rating)

Features

• Built-in Bluetooth -- monitor and configure via the VictronConnect app
• Up to 94% charging efficiency, generating far less heat than standard chargers

Specifications

• Output: 6V/12V, 1.1A

Features

• Built-in Bluetooth for monitoring via the VictronConnect app
• Up to 82% charging efficiency

Specifications

• Output: 12V / 5A, with DC connector

Features

• Built-in Bluetooth -- monitor and configure via the VictronConnect app
• Up to 94% charging efficiency

Specifications

• Rated voltage: 20V
• No-load speed: 0-400 / 0-1,500 rpm (2-speed)
• Impact rate: 0-6,400 / 0-24,000 bpm

Features

• 2-speed gearbox for high-speed or high-torque work
• Built-in LED work light for dark or enclosed areas

Specifications

• Battery voltage: 20V Max
• Battery capacity: 2.0Ah
• Battery cell type: Lithium-ion

Features

• Cross-compatible with the entire WORX 20V POWERSHARE tool range
• Two batteries can be combined for 40V tools

Specifications

• Output voltage: 20V Max
• Output current: 6A
• Charge time (2.0Ah battery): ~25 minutes

Features

• Built-in charge status indicator
• Overcharge protection

Specifications

• Battery voltage: 20V Max
• Motor type: Brushed
• No-load speed: 0-8600 rpm

Features

• Electronic kickback-sensing technology stops the wheel on pinch/jam detection
• Tool-free adjustable guard

Specifications

• Battery voltage: 20V PowerShare
• Motor type: Brushed
• No-load speed: 0-3,000 spm

Features

• Converts from reciprocating saw to jigsaw at the touch of a button
• Two pendulum settings for variable cut aggression

Specifications

• Battery voltage: 20V (PowerShare, tool only - battery/charger not included)
• Motor type: Brushed
• No-load speed: 0-3,000 spm

Features

• Converts from reciprocating saw to jigsaw at the touch of a button
• Two pendulum settings for variable cut aggression

Specifications

• Power input: 950W
• Belt size: 76mm x 533mm
• No-load belt speed: 240-350 m/min (variable)

Features

• Variable speed control for different material densities
• Quick belt change system